Emitters




		*requires Ce-2 glasses


	Emitter Information

This is a guideline for selecting an emitter based on platform and application for CrystalEyes. Most cases are covered here; any exceptions can be easily addressed by contacting support. The ESUN and ESGI have been upgraded

The new part numbers are listed below.

Emitter Selection Guide


	works with

Other products

Stereoready Graphics Cards

64Bit Windows Graphics Computers

Stereo Glasses

Monitor Zscreen

3D Visualization Software

Platform & Application	Criteria	Emitter & Accessories

PC/Unix Desktop	Stereo-ready video card with 3-pin mini-DIN	E2
	Stereo-ready video card without 3-pin mini-DIN	E2 + StereoEnabler
	SUN Workstation with stereo connector	E2SUN
	SGI Workstation with stereo connector	E2SGI
	non stereo-ready video card (Above and Below stereo application only)	EPC2
Mac Workstations	Power Mac G4 with stereo connector	E2Mac

PC/Unix Presentation Room	Stereo-ready video card with 3 pin mini-DIN	ELR2 or EXXR
	Stereo-ready video card without 3 pin mini-DIN	ELR2 or EXXR + StereoEnabler
	SUN Workstation with stereo connector	ELR2 or EXXR + E2ADAP Kit
	SGI Workstation with stereo connector	ELR2 or EXXR + E2ADAP Kit

PC/Unix Theatre	Cave and theatre environments require custom installation. Please contact a sales representative.	EXXR

Desktop Emitter Information

All of these desktop emitters have these common features:

Range

12ft (3.6m)

Infrared 'spread'

Wide Mode: 120 degrees
Narrow Mode: 60 degrees

Power Supply

PC: From Graphics Card
Mac: From Power Supply

Emitter	Features
E2	Designed for PC/Unix desktop workstations using 3 pin mini-DIN connectors. Emitter for workstations allowing control over the IR spread (for multi-user environments). Connectors: 3-pin mini-DIN
E2SGI	Designed for SGI desktop workstations. Emitter for workstations allowing control over the IR spread (for multi-user environments). Connectors: 3-pin mini-DIN, SGI DB-9
E2SUN	Designed for SUN desktop workstations. Emitter for workstations allowing control over the IR spread (for multi-user environments). Connectors: 3-pin mini-DIN, 7-pin mini-DIN, 3.5mm stereo jack
E2MP	Designed for cross-platform desktop workstations (PC/Unix, SUN, SGI). Emitter for workstations allowing control over the IR spread (for multi-user environments). Connectors: 3-pin mini-DIN, SGI DB-9, 7-pin mini-DIN, 3.5mm stereo jack
E2Mac	Designed for Power Mac G4's with ATI or NVIDIA graphics cards. OS X 10.2.3 or newer. VGA passthrough connector has 3-pin mini-Din stereo connector for emitter plug-in. 110-240 VAC auto detect power supply. Emitter for workstations allowing control over the IR spread (for multi-user environments). Connectors: VGA Pass-through connector




		Presentation Room Emitter Information

Emitter

ELR2

Specifications:

Model

ELR2

Range

20ft (6m)

Stereo Connector

3-pin mini-DIN - 8ft (2.5m) cable

Infrared 'spread'

120 degrees

Power Supply

110V or 230V external power supply (output 12VDC) supplied

Features

Designed for computers with 3 pin mini-DIN connectors in presentation rooms and demonstration areas.
Long range emitter designed for simple multi-emitter setup, allowing IR coverage in presentation rooms.
3-pin mini-DIN output connector on rear panel.
Daisy Chain via large venue accessory kit includes extension cables

Theatre Emitter Information

Emitter EXXR

Model

EXXR

Price (srp)

$695

Range

70ft (21m)

Stereo Connector

3-terminal connector block (For simple on-site connection) and BNC

Infrared 'spread'

130 degrees

Power Supply

Universal Power Supply (output 24VDC) supplied

Features

Long Range emitter with wide IR spread allowing very simple emitter setup in large theater-type rooms and also for multi-sided CAVE environments.
Daisy Chain via BNC T-connector (not supplied) for sync-signal only or serial connection using the 3-terminal connector block (also daisy-chains power).
Also available in 3-emitter bundle

Speciality Emitter Information

Emitter EPC2

Model

EPC2

Range

High Setting: 12ft (3.6m) Low Setting: 6ft (0.9m)

Stereo Connector

SVGA pass-through connector attaches directly to emitter.

Infrared 'spread'

120 degrees

Power Supply

Universal external power supply (output 12VDC) supplied

Features

Designed for desktop and work area application.
Sync-doubling emitter that allows stereo support on standard PCs that do not have stereo-ready graphics systems.
Feature connector output on emitter allows other emitters or Monitor ZScreen to be attached. Requires 0920057-006 adapter.


	[Distribution] [Direct Sales] [3Dvisual]